- Â SAdopt high – performace ARM Cortex-M7
- 80mm/s print speed
- Â Support CPCL and ZPL print protocol
- Equipped with 256 MB NAND FLASH
- Support TTF vector font
- Â Equipped with 1.3-inch OLED display
- Support Bluetooth 4.0/LE
- Optional Wi-Fi (802.11 b/g/n)
- Equipped with Micro-USB interface,support 5V/2A charge
POS HPRT HM-T3 Pro Printer
$499.00
3-inch Mobile Thermal Label Printer. 80mm/s print speed. Equipped with 256 MB NAND FLASH. Equipped with 1.3-inch OLED display. Support Bluetooth 4.0/LE. Optional Wi-Fi (802.11 b/g/n). Equipped with Micro-USB interface,support 5V/2A charge.
| Printing | Print Methoad: | Direct thermal line printing |
| Resolution: | 203dpi | |
| Print Speed: | Max. 80mm/s | |
| Printing Width: | Max. 72mm/576mm | |
| Communication Interface: | Standard micro-USB , Bluetooth 4.0 BLE/2.1+EDR (Dual Mode) Optional Wi-Fi（802.11b/g/n) | |
| Sensors: | Printer cover open detection，Out-of-paper detection，Gap detection (transmission, fixed, middle) Black mark detection (reflective, right side of print back) TPH Temperature detection | |
| Software: | HPRT Driver: | Windows XP，Vista,7，8，10.Linux,Mac |
| Paper | Paper Type: | Thermal receipt paper |
| Paper Width: | 55mm to 80mm (or 37mm to 63mm) | |
| Paper Capacity: | Diameter 57mm | |
| Power | Input: | AC 100~240V, 50/60Hz |
| Output: | DC 5V, 1A | |
| Reliability | TPH life: | 50 Km |
| Levels of protection: | IP42 | |
| Drop test standard: | 1.5m | |
| Hardware | Processor: | ARMv7E-M Cortex-M7 32-bit RISC Processor |
| RAM: | 32 MB | |
| Flash: | 256MB | |
| Physical Characteris | Working condition: | 0°C ~ 55°C, 10% ~ 85% R.H, no-condensing |
| Storage condition: | -10°C ~ 65°C, 5% ～ 90% R.H, no-condensing | |
| Battery | Voltage: | 7.4 V |
| Capacity: | 1800m Ah | |
Q & A
Ask a question
There are no questions yet
Reviews
There are no reviews yet